Table of Contents
Advertisement
14 Networking
204
Field
Maximum Upload
Speed
Overbooking allowed
Burst size
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Funkwerk Enterprise Communications GmbH
Description
The data rate limit applies to the selected queue. (This is not the
limit that can be defined on the interface.)
The function is enabled with
The function is disabled by default.
Only for Traffic Shaping enabled.
Enter a maximum data rate for the queue in kbits.
Possible values are
to
The default value is .
Only for Traffic Shaping enabled.
Enable or disable the function. The function controls the band-
width limit.
If Overbooking allowed is activated, the bandwidth limit set for
this queue can be exceeded, as long as free bandwidth exists
on the interface.
If Overbooking allowed is deactivated, the queue can never
occupy bandwidth beyond the bandwidth limit that has been set.
The function is enabled with
The function is disabled by default.
Only for Traffic Shaping enabled.
Enter the maximum number of bytes that may still be transmit-
ted temporarily when the data rate permitted for this queue has
been reached.
Possible values are
to
The default value is .
.
.
.
.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
