Table of Contents
Advertisement
10 System Management
90
Field
Maximum Number of
Accounting Log
Entries
10.2.2 Passwords
Setting the passwords is another basic system setting.
Note
All bintec devices are delivered with the same username and password. As long as
the password remains unchanged, they are not protected against unauthorised use.
Make sure you change the passwords to prevent unauthorised access to the device
If the password is not changed, under System Management->Status there appears
the warning: "System password not changed!"
The System Management->Global Settings->Passwordsmenu consists of the following
fields:
Fields in the PasswordsSystem Password menu
Field
System Admin Pass-
word
Confirm Admin Pass-
word
Funkwerk Enterprise Communications GmbH
Value
•
: Messages with emergency, alert, critical, error,
warning and notice priority are recorded.
•
(default value): Messages with emergency,
alert, critical, error, warning, notice and information priority are
recorded.
•
: All messages are recorded.
Enter the maximum number of accounting entries that are
stored internally in the device.
Possible values are
to
The default value is
.
Value
Enter the password for the user name
This password is also used with SNMPv3 for authentication
(MD5) and encryption (DES).
Confirm the password by entering it again.
.
.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
