Funkwerk Bintec R41000 Reference page 411

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
MAC Address
Node Name
IP Address
Netmask
Gateway
Authentication Pass-
word
Last Write Result
Description
Shows the interface of your device on which discovery is carried
out.
The value of this field can only be read.
Shows the MAC address of the discovered access point.
You can change the name of the discovered access point.
You can change the IP address of the discovered access point.
You can change the related netmask.
You can change the gateway address of the discovered access
point.
You must enter the administrator password for the access point,
The configuration operation cannot be performed without a
password.
The value of this field can only be read.
Displays the result of the last configuration operation.
Possible values:
: The access point reported a successful operation,
or a configuration change has not yet been performed with
OK .
: The access point has not responded.
: The access point reported an authorisation
error. Check the authentication password.
tended IP parameters (IP address, netmask, or gateway ad-
dress).
reached for internal reasons (e.g. the interface to which the
access point is connected is down). A configuration request
cannot be sent to the access point.
: The access point responds to the configura-
tion request with an unexpected or non-specific error.
21 Local Services
: There is a problem with the in-
: The access point cannot be
385

Advertisement

Table of Contents
loading

Table of Contents