Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
LED
Status
WLAN
flashing
Top row
WLAN
slow flashing
Bottom row
on
The LEDs on bintec R3000 are arranged as follows:
bintec R3000
Fig. 8: LEDs on
In operation mode, the LEDs on bintec R3000 display the following status information for
your device:
LED status display
LED
Status
Power
on
Status
Permanently on or
off
flashing
ETH 1 to 5
on
Top row
flashing
ETH 1 to 5
on
Bottom row
off
Information
Data traffic via the WLAN interface.
The WLAN module is active.
At least one WLAN client is connected.
Information
The power supply is connected.
Error.
The device is active.
The device is connected to the Ethernet.
Data traffic via the Ethernet interface.
Data traffic with 100 mbps.
Data traffic with 10 mbps.
6 Technical data
39
Advertisement
Table of Contents
