Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field
IP Compression
Alive Check
Description
Input in
: Enter the lifetime for phase 2 keys as amount
of data processed in Kbytes. The value can be a whole number
from
to
. The default value is .
Description
Select whether compression is to be activated before data en-
cryption. If data is compressed effectively, this can result in
higher performance and a lower volume of data to be trans-
ferred. In the case of fast lines or data that cannot be com-
pressed, you are advised against using this option as the per-
formance can be significantly affected by the increased effort
during compression.
The function is enabled with
The function is disabled by default.
Select whether and how IPSec heartbeats are used.
A bintec IPSec heartbeat is implemented to determine whether
or not a Security Association (SA) is still valid. This function
sends and receives signals every 5 seconds, depending on the
configuration. If these signals are not received after 20 seconds,
the SA is discarded as invalid.
Possible values:
•
: Your device neither sends nor expects a heart-
beat. Set this option if you use devices from other manufactur-
ers.
•
heartbeat from the peer, but does not send one itself.
•
: Your device expects no heartbeat from the peer, but
sends one itself.
•
heartbeat from the peer and sends one itself.
•
: Automatic detection of whether the remote ter-
minal is a bintec device. If it is, Heartbeat Both (for a remote
terminal with bintec) or None (for a remote terminal without
.
: Your device expects a
: Your device expects a
18 VPN
299
Advertisement
Table of Contents
