Funkwerk Bintec R41000 Reference page 101

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Important
Please look at the messages displayed in the sub-menus. These provide information
on any incorrect configurations.
Warning symbols
Icon
Pay particular attention to the following message:
"Warning: Changes not supported by the Setup Tool!" If you makes these changes
with the Funkwerk Configuration Interface , this can cause inconsistencies or mal-
functions. Therefore, it is recommended that the configuration is continued with the
Setup Tool.
8.3.1.3 Funkwerk Configuration Interface menus
The configuration options of your device are contained in the sub-menus, which are dis-
played in the navigation bar in the left-hand part of the window.
Note
Please note that not all devices have the full range of functions. Check the software of
your device on the corresponding product page under
The Funkwerk Configuration Interface contains the following menus:
Assistants
Menu
First steps
Internet Access
VPN
Meaning
This symbol appears in messages referring you to settings
that were made with the Setup Tool.
This symbol appears in messages referring you to the fact
that values were entered or selected incorrectly.
Function
In this menu you can make the basic settings that are required
to add your gateway to your local network (LAN).
The wizard guides you through the individual configuration
steps to connect your local network (LAN) to the internet.
In this menu you are guided through all of the settings that are
required to set up your LAN-LAN connection as a virtual private
network.
8 Access and configuration
www.funkwerk-ec.com
.
87

Advertisement

Table of Contents
loading

Table of Contents