Table of Contents
Advertisement
8 Access and configuration
96
After display of the BOOTmonitor prompt, press the space bar within four seconds to use
the functions of the BOOTmonitor. If you do not make an entry within four seconds, the
device changes back to normal operating mode.
Note
If you change the baud rate (the preset value is 9600 baud), make sure the terminal
program used also uses this baud rate. If this is not the case, you will not be able to
establish a serial connection to the device.
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
