Table of Contents
Advertisement
21 Local Services
398
Field
Master down trials
Pre-empt mode (go
back into master state)
Funkwerk Enterprise Communications GmbH
Description
sends via multicast BRRP advertisements, which also contain
the ID and the priority of the master.
Possible values are whole numbers between
value is indicated in seconds, the default value is 1.
An advertisement timer based on the sending interval for ad-
vertisements runs in the router and an advertisement packet is
sent when the timer expires.
Define the number of BRRP advertisements that must fail be-
fore the backup router with the lowest priority assumes that the
master is inactive and takes over the role of master.
A master down timer based on the Master down trials para-
meter runs in the router; when this timer expires, the backup as-
sumes that the master is not reachable if no advertisement has
been received.
The effective master down interval is the time calculated from
the number of expected but omitted BRRP advertisements, the
advertisement interval and the skew time, which adds a minim-
um period depending on the priority. The higher the priority, the
shorter the time added. Consequently, a backup router with a
higher priority responds more quickly than a router with lower
priority).
Possible values are whole numbers between
default value is
.
Define whether a backup router with higher priority has priority
over a master router with low priority.
Pre-empt mode is used to prevent unnecessary switching.
The function is enabled with
higher priority always takes precedence, i.e. as soon as the ori-
ginal master router becomes available again, it also becomes
active. If the function remains disabled, the currently active
backup router remains active even after the original master
router has become available again, independently of the master
router having higher priority than the currently active backup
router.
and
. The
.
and
and the
The router having the
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
