Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Destination Port/Range
Source IP Address/
Netmask
Source Port/Range
DSCP/TOS Filter
(Layer 3)
Description
Possible values:
•
(default value)
•
: Enter the IP address of the host.
•
: Enter the network address and the related net-
mask.
Only if Protocol =
,
Enter the destination port number or range of destination port
numbers that matches the filter.
Possible values:
•
(default value): The route is valid for all port numbers
•
: Enables the entry of a port number.
•
numbers.
Enter the source IP address and netmask of the data packets.
Only if Protocol =
,
Enter the source port number or range of source port numbers.
Possible values:
•
(default value): The route is valid for all port numbers
•
: Enables the entry of a port number.
•
numbers.
Select the Type of Service (TOS).
Possible values:
•
(default value): The type of service is ignored.
•
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format, 6 bit).
•
according to RFC 3260 is used to signal the priority of IP
: Enables the entry of a range of port
: Enables the entry of a range of port
: Differentiated Services Code Point
14 Networking
209
Advertisement
Table of Contents
