Table of Contents
Advertisement
14 Networking
202
Field
Control Mode
Queues/Policies
The menu Edit Queue/Policy consists of the following fields:
Fields in the Edit Queue/Policy menu
Field
Description
Outbound Interface
Priorisation queue
Funkwerk Enterprise Communications GmbH
Description
The function is enabled with
The function is disabled by default.
Only for Real Time Jitter Control enabled.
Select the mode for optimising voice transmission.
Possible values:
•
: All RTP streams are optimised. The
function activates the RTP stream detection mechanism for
the automatic detection of RTP streams. In this mode, the
Real Time Jitter Control is activated as soon as an RTP
stream has been detected.
•
: Voice data transmission is not optimised.
•
either the VoIP Application Layer Gateway (ALG) or the VoIP
Media Gateway (MGW) is active. Real Time Jitter Control is
activated by the control instances ALG or MGW.
•
: Real Time Jitter Control is always active, even if no
real time data is routed.
Configure the desired QoS queues.
For each class created from the class plan, which is associated
with the selected interface, a queue is generated automatically
and displayed here (only for data traffic classified as outgoing
and for data traffic classified as moving in both directions).
Add new entries with Add. The Edit Queue/Policy menu
opens.
Description
Enter the name of the queue/policy.
Shows the interface for which the QoS queues are being con-
figured.
Select the queue priority type.
.
: This mode is used if
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
