Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
be blocked. In this case it is necessary to make an entry at the end of the filter list that al-
lows all accesses that do not match a filter. (Setting for this: Category =
, Action =
• If you only create entries for those addresses that are to be allowed or logged, it is not
necessary to change the default behaviour (= all other calls are blocked).
21.5.2.1 New
Choose the New button to create additional filters.
The Local Services->Web Filter->Filter List->Newmenu consists of the following fields:
Fields in the Filter ListFilter Parameters menu
Field
Category
Day
Schedule (Start / Stop
or
)
Description
Select which category of addresses/URLs the filter is to be used
on.
The options are first the standard categories of the Proventia
Web Filter (default value:
also be defined for the following special cases, e.g.:
•
: This category applies to all Internet
addresses.
•
: Some addresses are already known to
the Proventia Web Filter, but not yet classified. The action as-
sociated with this category is used for such addresses.
•
: If an address is not known to the Proventia
Web Filter, the action associated with this category is used.
Select the days on which the filter is to be active.
Possible settings:
•
(default value): The filter is used every day of the
week.
•
: The filter is used on a certain day of the week.
Only one day can be selected per filter; several filters must be
configured if several individual days are to be covered.
•
: The filter is used from Monday to Friday.
The default value is
In From, enter from which time the filter is to be activated. The
21 Local Services
). Actions can
.
359
Advertisement
Table of Contents
