Qos - Funkwerk Bintec R41000 Reference

Bintec r1xxx/r3xxx/r4xxx gateways reference manual

Table of Contents

19.1.2 QoS

More and more applications need increasingly larger bandwidths, which are not always

available. Quality of Service (QoS) makes it possible to distribute the available bandwidths

effectively and intelligently. Certain applications can be given preference and bandwidth re-

served for them.

A list of all QoS rules is displayed in the Firewall->Policies->QoS menu.

19.1.2.1 New

Choose the New button to set up new QoS rules.

The Firewall->Policies->QoS->New menu consists of the following fields:

Fields in the QoSConfigure QoS Interface menu

Traffic Shaping

Funkwerk Enterprise Communications GmbH

A policy for which QoS has been enabled is also set for the fire-

wall. Make sure therefore that data traffic that has not been ex-

pressly authorised if blocked by the firewall!

Only for Apply QoS =

Select the priority with which the data specified by the policy is

handled on the send side.

Possible values:

(default value): No priority.

: Low Latency Transmission (LTT), i.e. hand-

ling of data with the lowest possible latency, e.g. suitable for

Select the interface on which bandwidth management is to be

carried out.

Select whether you want to activate bandwidth management for

R1xxx/R3xxx/R4xxx