Funkwerk Bintec R41000 Reference page 113

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Last configuration
stored
Fields in the Resource Information menu
Field
CPU Usage
Memory Usage
ISDN Usage Internal
ISDN Usage External
Active Sessions (SIF,
RTP, etc... )
Active IPSec Tunnels
Fields in the StatusModules menu
Field
DSP Module
Additional fields in the StatusPhysical Interfaces menu
Field
Interface - Connection
Information - Link
Value
Displays day, date and time of the last saved configuration (boot
configuration in flash).
Value
Displays the CPU usage as a percentage.
Displays the usage of the working memory in MByte in relation
to the available total working memory in MByte. The usage is
also displayed in brackets as a percentage.
Shows the number of active B channels and the maximum num-
ber of available B channels for internal connections.
Shows the number of active B channels and the maximum num-
ber of available B channels for external connections.
Displays the total of all SIF, TDRC, and IP load balancing ses-
sions.
Displays the number of currently active IPSec tunnels in relation
to the number of configured IPSec tunnels.
Value
Shows the type of plugged DSP module if any. An acquired fax
licence, if any, can be displayed.
Value
The physical interfaces are listed here and their most important
settings are shown. The system also displays whether the inter-
face is connected or active.
Interface specifics for Ethernet interfaces:
• IP address
• Netmask
Interface specifics for serial/ISDN interfaces:
• Configured
• Not configured
Interface specifics for xDSL interfaces:
10 System Management
87