Table of Contents
Advertisement
8 Access and configuration
90
Menu
WLAN
Administration
Networking
Menu
Routes
NAT
Load Balancing
QoS
Access Rules
Routing Protocols
Menu
RIP
OSPF
Multicast
Menu
General
IGMP
Forwarding
OSPF
WAN
Funkwerk Enterprise Communications GmbH
Function
In this menu, you configure your wireless modules as an access
point or as an access client.
In this menu, you make the basic WLAN settings.
Function
In this menu, you enter additional routes.
In this menu, you configure the NAT firewall (NAT, Network Ad-
dress Translation).
In this menu, you configure application-controlled bandwidth
management.
In this menu, you configure all the "Quality of Service" settings.
In this menu, accesses to data and functions are restricted.
Function
In this menu, you configure the dynamic updating of the routing
table via RIP.
In this menu, all global and interface-specific OSPF settings are
performed.
Function
In this menu, you enable or disable multicast routing.
In this menu, you configure the interfaces on which IGMP is to
be enabled.
In this menu, you specify which multicast groups are always
passed between the interfaces of your device.
In this menu, you can turn on and off all PIM functionalities.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
