Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
LED
Status
ISDN-1 B/D
on
Top row
ISDN-1 B/D
on
Bottom row
flashing
MA / HA
flashing
Top row
MA / HA
on
Bottom row
WLAN
on
Top row
WLAN
flashing
Bottom row
The LEDs on bintec R1200wu are arranged as follows:
bintec R1200wu
Fig. 7: LEDs on
In operation mode, the LEDs on bintec R1200wu display the following status information
for your device:
LED status display
LED
Status
Power
on
Information
ISDN D-channel is active.
One ISDN B channel is active.
Both ISDN B channels are active.
BRRP packets are received.
A user is logged in to the system (e.g. over Tel-
net).
The WLAN module is active.
Data traffic via the WLAN interface.
Information
The power supply is connected.
6 Technical data
37
Advertisement
Table of Contents
