Table of Contents
Advertisement
17 WAN
274
Field
Virtual Channel Con-
nection (VCC)
Virtual Path Connec-
tion (VPC)
Fields in the OAM ControllingLoopback menu
Field
Loopback End-to-End
End-to-End Send Inter-
val
End-to-End Pending
Requests
Loopback Segment
Funkwerk Enterprise Communications GmbH
Description
•
: (virtual path level) The OAM settings are used for the vir-
tual path.
Only for OAM Flow Level =
Select the already configured ATM connection to be monitored
(displayed by the combination of VPI and VCI).
Only for OAM Flow Level =
Select the already configured virtual path connection to be mon-
itored (displayed by the VPI).
Description
Select whether you activate the loopback test for the connection
between the endpoints of the VCC or VPC.
The function is enabled with
The function is disabled by default.
Only if Loopback End-to-End is enabled.
Enter the time in seconds after which a loopback cell is to be
sent.
Possible values are
to
The default value is 5.
Only if Loopback End-to-End is enabled.
Enter the number of directly consecutive loopback cells that
may fail to materialise before the connection is regarded as in-
terrupted ("down"). Possible values are
The default value is .
Select whether you want to activate the loopback test for the
segment connection (segment = connection of the local end-
point to the next connection point) of the VCC or VPC.
The function is enabled with
.
.
to
.
.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
