Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Number of Admitted
Connections
Start Mode
Fields in the Advanced SettingsAdvanced IP Options menu
Field
Back Route Verify
Proxy ARP
Description
wish to use this IPSec peer XAuth for authentication.
If XAuth is used together with IKE Config Mode, the transac-
tions for XAuth are carried out before the transactions for IKE
Config Mode.
Choose how many users can connect using this peer profile.
Possible values:
•
(default value): Only one peer can be connected
with the data defined in this profile.
•
: Several peers can be connected with the
data defined in this profile. The peer entry is duplicated for
each connection request with the data defined in this profile.
Select how the peer is to be switched to the active state.
Possible values:
•
(default value): The peer is switched to the active
state by a trigger.
•
: The peer is always active.
Description
Select whether a check on the back route should be activated
for the interface to the connection partner.
The function is enabled with
The function is disabled by default.
Select whether your device is to respond to ARP requests from
its own LAN on behalf of the specific connection partner.
Possible values:
•
(default value): Deactivates Proxy ARP for this
IPSec peer.
•
: Your device only responds to an ARP re-
quest if the status of the connection to the IPSec peer is
(active) or
. In the case of
only responds to the ARP request; the connection is not set
.
, your device
18 VPN
285
Advertisement
Table of Contents
