Table of Contents
Advertisement
11 Physical Interfaces
124
Field
Incoming Service Type Only for AUX Port Status enabled
SIM Card Uses PIN
Modem Escape Char-
acter
Modem Init Sequence
Funkwerk Enterprise Communications GmbH
Description
•
: The Baud rate of the serial terminal connection is
retained. (9600 in ex works state)
All other values mean that the modem is addressed at the cor-
responding speed in bps.
•
•
•
•
(default value): Recommended for communica-
tion with a GSM modem.
•
: Recommended for communication with an ana-
logue modem.
Here you select the gateway subsystem to which an incoming
call over the modem is to be assigned.
Possible values:
•
: No call is accepted.
•
: The call is assigned to the ISDN Login subsys-
tem.
•
(default value): The call is assigned to the PPP
subsystem.
Only for AUX Port Status enabled
Here you enter the PIN of your GSM modem, if your modem
asks for it.
Entering a wrong PIN blocks communication with the modem
until the entry in the profile is corrected.
Only for AUX Port Status enabled
The value for this field is set by default to . It should only be
changed if the escape character of the modem is different.
Only for AUX Port Status enabled
Here you can enter an initialization string for your modem. The
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
