Table of Contents
Advertisement
12 LAN
150
12.1.1.1 Edit or New
Choose the
icon to edit existing entries. Choose the New button to create virtual inter-
faces.
The LAN->IP Configuration->Interfaces->
Fields in the InterfacesBasic Parameters menu
Field
Based on Ethernet In-
terface
Address Mode
IP Address / Netmask
Interface Mode
Funkwerk Enterprise Communications GmbH
menu consists of the following fields:
Description
This field is only displayed if you are editing a virtual routing in-
terface.
Select the Ethernet interface for which the virtual interface is to
be configured.
Select how an IP address is assigned to the interface.
Possible values:
•
(default value): The interface is assigned a static IP
address in IP Address / Netmask.
•
: An IP address is assigned to the interface dynamically
via DHCP.
Only for Address Mode =
With Add, add a new address entry, enter the IP Address and
the corresponding Netmask of the virtual interface.
Only for physical interfaces in routing mode.
Select the configuration mode of the interface.
Possible values:
•
(default value): The interface is not assigned for a
specific purpose.
•
: This option only applies for routing inter-
faces.
You use this option to assign the interface to a VLAN. This is
done using the VLAN ID, which is displayed in this mode and
can be configured. The definition of a MAC address in MAC
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
