Table of Contents
Advertisement
8 Access and configuration
82
If you save a current configuration, you can save this as the boot configuration or you can
also archive the previous boot configuration as a backup.
If you click the Save configuration button in the FCI, you will be asked "Do you really want
to save the current configuration as a boot configuration?"
You have the following two options:
•
•
configuration while also archiving previous boot configuration as backup.
If you want to load the archived boot configuration into your device, go to the
Maintenance->Software &Configuration menu, select Action =
and click on Go. The archived backup is used as the current boot configuration.
The navigation bar also contains the main configuration menus and their sub-menus.
Click the main menu you require. The corresponding sub-menu then opens.
If you click the sub-menu you want, the entry selected will be displayed in red. All the other
sub-menus will be closed. You can see at a glance the sub-menu you are in.
Status page
If you call the Funkwerk Configuration Interface , the status page of your device is dis-
played after you log in. The most important data of your device can be seen on this at a
glance.
Main configuration window
The sub-menus generally contain several pages. These are called using the buttons at the
top of the main window. If you click a button, the window is opened with the basic paramet-
ers. You can extend this by clicking the Advanced Settings tab, which displays the addi-
tional options.
Configuration elements
The various actions that you can perform when configuring your device in the Funkwerk
Configuration are triggered by means of the following buttons:
Funkwerk Configuration Interface buttons
Button
Funkwerk Enterprise Communications GmbH
, i.e. save the current configuration as the boot configuration
i.e. save current configuration as boot
Function
Updates the view.
If you do not want to save a newly configured list entry, cancel
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
