Table of Contents
Advertisement
17 WAN
256
Field
Encryption
Callback Mode
Funkwerk Enterprise Communications GmbH
Description
lect this option.
Only for Authentication =
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. This is only possible if
STAC or MS-STAC compression is not activated for the con-
nection. If Encryption is set, the remote terminal must also sup-
port it, otherwise a connection cannot be set up.
Possible values:
•
(default value): MPP encryption is not used.
•
: MPP encryption V2 with 128 bit is used to RFC
3078.
•
used as compatible with Microsoft and Cisco.
Select the Callback Mode function.
Possible values:
•
(default value): Your device does not call back.
•
: Select one of the following options:
•
partner to request a callback.
•
partner to request a callback via CBCP (Callback Control
Protocol). Needed for Windows clients.
•
: Select one of the following options:
•
mediately when requested to do so by the connection part-
ner.
•
period of time proposed by the Microsoft client (NT: 10
seconds, new systems: 12 seconds. It uses the call number
(Entries->Call Number) with the Mode
, entered for the connection partner. If no number is
entered, the required number can be reported by the caller
in a PPP negotiation. This setting should be avoided where
possible for security reasons. Currently cannot be avoided
for the connection of mobile Microsoft clients via DCN.
: MPP encryption V2 with 128 bit is
: Your device calls the connection
: Your device calls the connection
: Your device calls back im-
: Your device calls back after a
R1xxx/R3xxx/R4xxx
or
Advertisement
Table of Contents
