Table of Contents
Advertisement
24 Monitoring
426
Field
Signal dBm (RSSI1,
RSSI2, RSSI3)
Noise dBm
Data Rate mbps
VSS - Details for Connected Clients
In the Monitoring->WLAN->VSS-><Connected client>->
activities of a connected client are shown. The values for wireless mode 802.11n are listed
separately.
Values in the VSS <connected client> list
Field
Client MAC Address
IP Address
Up Time
Signal dBm (RSSI1,
RSSI2, RSSI3)
Noise dBm
SNR dB
Data Rate mbps
Funkwerk Enterprise Communications GmbH
Description
Shows the received signal strength in dBm.
Shows the received noise strength in dBm.
Shows the current transmission rate of data received by this cli-
ent in mbps.
The following clock rates are possible: IEEE 802.11b: 11, 5.5, 2
and 1 mbps; IEEE 802.11g/a: 54, 48, 36, 24, 18, 12, 9, 6 mbps.
If the 5 GHz frequency band is used, the indication of 11, 5.5, 2
and 1 mbps is suppressed for IEEE 802.11b.
Description
Shows the MAC address of the associated client.
Shows the IP address of the client.
Shows the time in hours, minutes and seconds for which the cli-
ent is logged in.
Shows the received signal strength in dBm.
Shows the received noise strength in dBm.
Signal-to-Noise Ratio in dB is an indicator of the quality of the
wireless connection.
Values:
• > 25 dB excellent
• 15 – 25 dB good
• 2 – 15 dB borderline
• 0 – 2 dB bad.
Shows the current transmission rate of data received by this cli-
ent in mbps. The following clock rates are possible: IEEE
menu, the current values and
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
