Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Default Route Distribu-
tion
Poisoned Reverse
RFC 2453 Variable
Timer
RFC 2091 Variable
Timer
Description
ceiving RIP updates, is only for test purposes. If the setting is
changed, this can mean that your device sends and listens at a
port that no other devices use. The default value
retained.
Select whether the default route of your device is to be propag-
ated via RIP updates.
The function is enabled with
The function is enabled by default.
Select the procedure for preventing routing loops.
With standard RIP, the routes learnt are propagated over all in-
terfaces with RIP SEND activated. With Poisoned Reverse ,
however, your device propagates via the interface over which it
learned the routes, with the metric (Next Hop Count) 16
(="Network is not reachable").
The function is enabled with
The function is disabled by default.
For the timers described in RFC 2453, select whether to use the
same values that you can configure in the Timer for RIP V2
(RFC 2453) menu.
The function is enabled with
The function is enabled by default.
If you deactivate the function, the times defined in RFC are re-
tained for the timeouts.
For the timers described in RFC 2091, select whether to use the
same values that you can configure in the Timer for Triggered
RIP (RFC 2091) menu.
The function is enabled with
The function is disabled by default.
If the function is not activated, the times defined in RFC are re-
tained for the timeouts.
15 Routing Protocols
should be
.
.
.
.
217
Advertisement
Table of Contents
