Funkwerk Bintec R41000 Reference page 417

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Domain at the HotSpot
Server
Walled Garden
Walled Network / Net-
mask
Walled Garden URL
Terms &Conditions
Description
Caution
For security reasons you cannot configure your device over
an interface that is configured for the Hotspot. Therefore
take care when selecting the interface you want to use for
the Hotspot.
If you select the interface over which the current configura-
tion session is running, the current connection will be lost.
You must then log in again over a reachable interface that
is not configured for the Hotspot to configure your device.
Enter the domain name that you used when setting up the Hot-
Spot server for this customer. The domain name is required so
that the Hotspot server can distinguish between the different cli-
ents (customers).
Enable this function if you want to define a limited and free area
of websites (intranet).
The function is not activated by default.
Only if Walled Garden is enabled.
Enter the network address of the Walled Network, the corres-
ponding Netmask of the intranet server.
For the address range resulting from Walled NetworkNetmask,
clients require no authentication.
Example: Enter 192.168.0.0 / 255.255.255.0, if all IP addresses
from 192.168.0.0 to 19.168.0.255 are free. Enter 192.168.0.1 /
255.255.255.255, if only the IP address 192.168.0.1 is free.
Only if Walled Garden is enabled.
Enter the Walled Garden URL of the intranet server. Freely ac-
cessible websites must be reachable over this address.
Only if Walled Garden is enabled.
In the Terms &Conditions input field, enter the address of the
general terms and conditions on the intranet server, or public
server, e.g., http://www.webserver.de/agb.htm. The page must
21 Local Services
391

Advertisement

Table of Contents
loading

Table of Contents