Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
over ATM)
Field
Default Ethernet for
PPPoE Interfaces
Address Mode
IP Address/Netmask
MAC Address
DHCP MAC Address
Description
Only for Type =
Select whether this Ethernet-over-ATM interface is to be used
for all PPPoE connections
The function is enabled with
The function is disabled by default.
Only for Type =
Select how an IP address is to be assigned to the interface.
Possible values:
•
(default value): The interface is assigned a static IP
address in IP Address/Netmask.
•
: An IP address is assigned to the interface dynamically
via DHCP.
Only for Address Mode =
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interfaces. Add new entries
with Add.
Enter a MAC address for the internal router interface of ATM
connection, e.g.
quired in special cases.
For Internet connections, it is sufficient to select the option Use
built-in (default setting). The address used is derived from the
MAC address of the
Only for Address Mode =
Enter the MAC address of the internal router interface of ATM
connection, e.g.
If your provider has assigned you a MAC address for DHCP,
enter this here.
You can also select the Use built-in option (default setting) The
address used is derived from the MAC address of the
.
. An entry is only re-
.
.
.
17 WAN
.
269
Advertisement
Table of Contents
