Table of Contents
Advertisement
6 Technical data
44
LED
Status
flashing
SHDSL-2/1
on
Top row
flashing
The LEDs on bintec R3800 are arranged as follows:
bintec R3800
Fig. 11: LEDs on
In operation mode, the LEDs on bintec R3800 display the following status information for
your device:
LED status display
LED
Status
Power
on
Status
Permanently on or
off
flashing
ETH 1 to 5
on
Top row
flashing
ETH 1 to 5
on
Bottom row
off
Funkwerk Enterprise Communications GmbH
Information
Data traffic over the SHDSL wire pair 4-5.
The wire pair 7-8 on the SHDSL line has suc-
cessfully synchronized with the DSLAM of the
SHDSL provider.
Data traffic over the SHDSL wire pair 7-8.
Information
The power supply is connected.
Error.
The device is active.
The device is connected to the Ethernet.
Data traffic via the Ethernet interface.
Data traffic with 100 mbps.
Data traffic with 10 mbps.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
