Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Class ID
Priority
Weight
RTT Mode (Realtime
Traffic Mode)
Traffic Shaping
Description
Possible values:
•
(default value): Queue for data classified as
"normal" .
•
: Queue for data classified as "high priority" .
•
: Queue for data that has not been classified or data
of a class for which no queue has been configured.
Only for Priorisation queue =
Select the QoS packet class to which this queue is to apply.
To do this, at least one class ID must be given in the Network-
ing->QoS->QoS Classification menu.
Only for Priorisation queue =
Choose the priority of the queue. Possible values are
to
The default value is .
Only for Priorisation algorithm =
or
Choose the priority of the queue. Possible values are
The default value is .
Active or deactivate the real time transmission of the data.
The function is enabled with
The function is disabled by default.
RTT mode should be activated for QoS classes in which real
time data has priority. This mode improves latency when for-
warding real time datagrams.
It is possible to configure multiple queues when RTT mode is
enabled. Queues with enabled RTT mode must always have a
higher priority than queues with disabled RTT mode.
Activate or deactivate data rate (=Traffic Shaping) limiting in the
send direction.
14 Networking
.
.
.
to
.
.
203
Advertisement
Table of Contents
