Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Server IP Address
RADIUS Secret
Default User Password Some Radius servers require a user password for each RADI-
Priority
Entry active
Group Description
Value
In standard applications, leave the value set to
Possible values for hotspot applications:
•
: For France Telecom hotspot applications.
•
Enter the IP address of the RADIUS server.
Enter the shared password used for communication between
the RADIUS server and your device.
US request. Enter the password that your device sends as the
default user password in the prompt for the dialout routes on the
RADIUS server.
If a number of RADIUS server entries were created, the server
with the highest priority is used first. If this server does not an-
swer, the server with the next-highest priority is used.
Possible values from
(highest priority) to
The default value is .
See also Policy in the Advanced Settings.
Select whether the RADIUS server configured in this entry is to
be used.
The function is activated by selecting
The function is enabled by default.
Define a new RADIUS group description or assign the new RA-
DIUS entry to a predefined group. The configured RADIUS
servers for a group are queried according to Priority and the
Policy.
Possible values:
•
(default value): Enter a new group description in the text
field.
•
: Select this entry for special applications,
such as Hotspot Server configuration.
10 System Management
: For bintec hotspot applications.
(lowest priority).
.
.
107
Advertisement
Table of Contents
