Table of Contents
Advertisement
17 WAN
264
Field
Fields in the Advanced SettingsDial Numbers menu
Field
Entries
Fields in the menu Dial Number Configuration entry: <1> (only appears for Entries =
Add)
Field
Mode
Call Number
Port Usage
Fields in the Advanced SettingsIP Options menu
Field
Proxy ARP Mode
Funkwerk Enterprise Communications GmbH
Description
crosoft client also has the option of aborting callback and
maintaining the initial connection to your device without call-
back. This only applies if no fixed, outgoing number has
been configured for the connection partner. This is done by
pressing CANCEL to close the dialog box that appears.
Description
Add new entries with Add.
Description
Only if Entries =
Defines whether Number should be used for incoming or outgo-
ing calls or for both. Possible values:
•
(default value): For incoming and outgoing calls.
•
: For incoming calls, where your connection part-
ner dials in to your device.
•
: For outgoing calls, if you wish to dial in to your
connection partner.
The calling party number of the incoming call is compared with
the number entered under Number.
Enter the connection partner's numbers.
Select which port is used.
Description
Select whether and how ARP requests from your own LAN are
to be responded to for the specified connection partner.
Possible values:
•
(default value): Deactivates Proxy ARP for this
connection partner.
•
: Your device only responds to an ARP re-
quest if the status of the connection to the connection partner
is
or
. In the case of
, your device only re-
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
