Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Note
The device is also reset to ex works state including all user passwords if you switch
the device on and off five times instead of three times when the device is off.
Note
If you delete the boot configuration using the Funkwerk Configuration Interface
(menu Maintenance->Software & Configuration ), all passwords will also be reset
and the current boot configuration deleted. The next time, the device will boot with the
standard ex works settings.
You can now configure your device again as described from
12.
Basic configuration
on page
5 Reset
23
Advertisement
Table of Contents
