Funkwerk Bintec R41000 Reference page 463

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Uptime
Upstream Join Timer
Shortest Path Tree
Values in the (S,G,RPT) States list
Field
Multicast Group Ad-
dress
Source IP Address
Reverse-
Path-Forwarding (RPF)
Uptime
Upstream Override
Timer
24.10.3 Interface-Specific States
The menu Monitoring+PIM+Interface-Specific States includes interface-specific status
information.
Values in the Interface-Specific States list
Field
View
Description
State Machine in the PIM-SM specification.
Indicates the timespan since the entry was generated by the
local router.
Indicates the remaining time until the local router sends out the
next periodic (S,G) Join message on pimSGRPFIfIndex. In the
PIM-SM specification, this timer is named (S,G) Upstream Join
Timer. If the timer is deactivated, it has the value .
Indicates whether the Shortest Path Tree Bit is set, i.e. whether
forwarding via the Shortest Path Tree should take place.
Description
Displays the multicast group address. InetAddressType is
defined in the pimStarGAddressType object.
Displays the source IP address. InetAddressType is defined in
the pimStarGAddressType object.
Indicates the address type of the RPF Next Hop to the RP, or
unknown(0), if the RPF Next Hop is not known.
Indicates the timespan since the entry was generated by the
local router.
Indicates the remaining time until the local router sends out the
next Triggered (S,G, rpt) Join message on pimSGRPFIfIndex. In
the PIM-SM specification, this timer is named (S,G, rpt) Up-
stream Override Join Timer. If the timer is deactivated, it has the
value .
Description
Select the desired view from the dropdown menu.
The following are available:
and
, ,
24 Monitoring
437