Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Fields in the ADSL ConfigurationDSL Parameter menu
Field
DSL Mode
DSL SyncType
Transmit Shaping
Description
Define which Annex of ITU-T Recommendation G.991.2 is used
for the connection.
Possible values:
•
: For applications in North America
(provider-dependent) for example.
•
(default value): For applications in Europe
(provider-dependent) for example.
Select the ADSL synchronization type.
Possible values:
•
automatically adapted for the remote terminal.
•
:ADSL1 / G.DMT is used.
•
: ADSL2 / G.992.3 is used.
•
: ADSL2 Plus / G.992.5 is used.
•
: The ADSL interface is not active.
Only for ADSL Mode =
•
adapted to the remote terminal with reference to G.992.3 An-
nex M.
•
is used.
•
: ANSI T1.413
Only for ADSL Mode =
•
: ETSI T1.413
Select whether the data rate in the send direction is to be re-
duced. This is only needed in a few cases for special DSLAMs.
Possible values:
•
tion is not reduced.
11 Physical Interfaces
(default value): The ADSL mode is
: The ADSL mode is automatically
: ADSL2 Plus / G.992.3 Annex M
: The data rate in the send direc-
139