Table of Contents
Advertisement
14 Networking
196
Field
Destination IP Ad-
dress/Netmask
Destination Port/Range Only for Protocol =
Source IP Address/
Netmask
Source Port/Range
DSCP/TOS Filter
(Layer 3)
Funkwerk Enterprise Communications GmbH
Description
•
(default value): All TCP packets match the filter.
Enter the destination IP address of the data packets and the
corresponding netmask.
or
Enter a destination port number or a range of destination port
numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
Enter the source IP address of the data packets and the corres-
ponding netmask.
Only for Protocol =
or
Enter a source port number or a range of source port numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
Specify how the priority of the IP packets is signalled.
Possible values:
•
(default value): No priority signalling is used.
•
: Differentiated Services Code Point is
used to signal the priority of IP packets (indicated in binary
format, 6 bit).
•
is used to signal the priority of IP packets (indicated in decim-
al format).
•
: Type of Service is used to signal the
priority of IP packets (indicated in binary format 8 bit).
•
: Type of Service is used to signal the
: Enter a destination port range.
: Enter a destination port range.
: Differentiated Services Code Point
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
