Table of Contents
Advertisement
11 Physical Interfaces
138
celeration. Up to 100 additional IPSec tunnels can also be enabled if licensed. The integ-
rated second ISDN S0 interface can also be enabled by licence if required.
The menu Physical Interfaces->ADSL Modem->ADSL Configuration consists of the fol-
lowing fields:
Fields in the ADSL ConfigurationDSL Port Status menu
Field
DSL Chipset
Physical Connection
Fields in the ADSL ConfigurationCurrent Line Speed menu
Field
Downstream
Upstream
Funkwerk Enterprise Communications GmbH
Description
Shows the key of the installed chipset.
Shows the current ADSL operation mode. The value cannot be
changed.
Possible values:
•
: The ADSL link is not active.
•
: ANSI T1.413
•
: ADSL classic, G.DMT, ITU G.992.1
•
: Splitterless ADSL, ITU G.992.2
•
: G.DMT.Bis, ITU G.992.3
•
: ADSL2 Double Ended Line Test
•
: ADSL2 Plus, ITU G.992.5
•
: ADSL2 Plus Double Ended Line Test
•
: Reach Extended ADSL2
•
: Reach Extended ADSL2 Double Ended Line
Test.
•
•
Description
Displays the data rate in the receive direction (direction from
CO/DSLAM to CPE/router) in bits per second.
The value cannot be changed.
Displays the data rate in the send direction (direction from CPE/
router to CO/DSLAM) in bits per second.
The value cannot be changed.
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
