Funkwerk Bintec R41000 Reference page 271

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
User Name
Password
Always on
Connection Idle
Timeout
Fields in the PPTPIP Mode and Routes menu
Field
IP Address Mode
Description
port to which the modem is connected.
When using the internal DSL modem, select here the EthoA in-
terface configured in Physical
Interfaces->ATM->Profiles->New for this connection, e.g.
.
Enter the user name.
Enter the password.
Select whether the interface should always be activated.
The function is enabled with
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Only if Always on is disabled.
Enter the idle interval in seconds. This determines how many
seconds should pass between sending the last traffic data pack-
et and clearing the connection.
Possible values are
to
timeout.
The default value is
.
Example:
for FTP transmission,
sion,
for Internet connections.
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
(default value): Your device is automatic-
ally assigned a temporarily valid IP address from the provider.
.
(seconds).
deactivates the
for LAN-to-LAN transmis-
17 WAN
245

Advertisement

Table of Contents
loading

Table of Contents