Funkwerk Bintec R41000 Reference page 344

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

18 VPN
318
Field
Compression
LCP Alive Check
Fields in the Advanced SettingsIP Options menu
Field
OSPF Mode
Proxy ARP Mode
Funkwerk Enterprise Communications GmbH
Description
used to RFC 3078.
used as compatible with Microsoft and Cisco.
Select the type of comprission, if needed.
Possible values:
(default value): Encryption is not used.
: Microsoft Point-to-Point Compression
Check whether the reachability of the remote terminal is to be
checked by sending LCP echo requests or replies. This is re-
commended for leased lines, PPTP and L2TP connections.
The function is enabled with
The function is enabled by default.
Description
Select whether and how routes are propagated via the interface
and/or OSPF protocol packets are to be sent.
Possible values:
(default value): OSPF is not activated for this inter-
face, i.e. no routes are propagated or OSPF protocol packets
sent over this interface. Networks reachable over this inter-
face are, however, included when calculating the routing in-
formation and propagated over active interfaces.
: OSPF is activated for this interface, i.e. routes are
propagated or OSPF protocol packets sent over this interface.
: OSPF is disabled for this interface.
Select whether your device is to answer APR requests from
your LAN on behalf of the specific PPTP partner.
Possible values:
: MPP encryption V2 with 128 bit is
.
R1xxx/R3xxx/R4xxx

Advertisement

Table of Contents
loading

Table of Contents