Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Retries
RADIUS Dialout
Value
(dialup connection), this can cause additional costs if the server
is
for a long time.
The function is activated by selecting
The function is enabled by default.
Enter the number of retries for cases when there is no response
to a request. If an response has still not been received after
these attempts, the Status is set to
your device attempts to reach the server every 20
seconds. If the server responds, Status is set back to
Possible values are whole numbers between
The default value is . To prevent Status being set to
this value to .
Only for Authentication Type =
Select whether your device receives requests from RADIUS
server dialout routes. This enables temporary interfaces to be
configured automatically and your device can initiate outgoing
connections that are not configured permanently.
The function is activated by selecting
The function is disabled by default.
If the function is active, you can enter the following options:
•
: Enter the time period in seconds
between update intervals.
The default entry here is
ried out.
•
user password for each RADIUS request. Enter the password
that your device sends as the default user password in the
prompt for the dialout routes on the RADIUS server.
By default,
10 System Management
.
. In Alive Check =
and
.
.
i.e. an automatic reload is not car-
: Some Radius servers require a
is empty.
.
.
, set
and
109
Advertisement
Table of Contents
