Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Segment Send Interval Only if Loopback Segment is enabled.
Segment Pending Re-
quests
Fields in the OAM ControllingCC Activation menu
Field
Continuity Check (CC)
End-to-End
Description
The function is disabled by default.
Enter the time in seconds after which a loopback cell is sent.
Possible values are
to
The default value is .
Only if Loopback Segment is enabled.
Enter the number of directly consecutive loopback cells that
may fail to materialise before the connection is regarded as in-
terrupted ("down").
Possible values are
to
The default value is .
Description
Select whether you activate the OAM-CC test for the connection
between the endpoints of the VCC or VPC.
Possible values:
•
(default value): OAM CC requests are responded to
after CC negotiation (CC activation negotiation).
•
: OAM CC requests are sent after CC negotiation
(CC activation negotiation).
•
: OAM CC requests are sent and answered after CC ne-
gotiation (CC activation negotiation).
•
: Depending on the setting in the Direc-
tion field, OAM CC requests are either sent and/or responded
to. There is no CC negotiation.
•
: The function is disabled.
Also select whether the test cells of the OAM CC are to be sent
or received.
Possible values:
.
.
17 WAN
275
Advertisement
Table of Contents
