Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
User Name
Remote User (for Dial-
in only)
Password
Always on
Connection Idle
Timeout
Fields in the ISDNIP Mode and Routes menu
Field
IP Address Mode
Description
Possible values:
•
: For 64-kbps ISDN data connections.
•
: For 56-kbps ISDN data connections.
Enter your device code (local PPP user name).
Enter the code of the remote terminal (remote PPP user name).
Enter the password.
Select whether the interface should always be activated.
The function is enabled with
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
to
that the connection is set up again immediately after disconnec-
tion and
deactivates short hold. The default value is
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
(default value): You enter a static IP address.
•
IP address to the remote terminal.
•
: Your device is dynamically assigned an
IP address.
.
(seconds). A value of
: Your device dynamically assigns an
17 WAN
means
.
253
Advertisement
Table of Contents
