Funkwerk Bintec R41000 Reference page 56

6 Technical data
42
LED Status
ISDN-1 B/D on
Bottom row
flashing
ADSL flashing
Top row
on
ADSL flashing
Bottom row
synchronous flash-
ing
asynchronous
flashing
WLAN flashing
Top row
WLAN slow flashing
Bottom row
on
The LEDs on bintec R3400 are arranged as follows:
bintec R3400
Fig. 10: LEDs on
In operation mode, the LEDs on bintec R3400 display the following status information for
Funkwerk Enterprise Communications GmbH
Information
One ISDN B channel is active.
Both ISDN B channels are active.
The device synchronises with the DSLAM of the
ADSL provider.
The device has successfully synchronised with
the DSLAM of the ADSL provider.
Data traffic via the ADSL interface.
ADSL Handshake.
ADSL system error.
Data traffic via the WLAN interface.
The WLAN module is active.
At least one WLAN client is connected.
R1xxx/R3xxx/R4xxx