Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
IPSec Debug Level
The Advanced Settings menu is for adapting certain functions and features to the special
requirements of your environment, i.e. mostly interoperability flags are set. The default val-
ues are globally valid and enable your system to work correctly to other bintec devices, so
that you only need to change these values if the remote terminal is a third-party product or
you know special settings are necessary. These may be needed, for example, if the remote
end operates with older IPSec implementations.
The menu Advanced Settings consists of the following fields:
Fields in the OptionsAdvanced Settings menu
Field
IPSec Pathfinder Mode Select whether IPSec Pathfinder Mode should be used.
Description
You can only delete the configuration with Enable IPSec = Not
activated..
Select the priority of the syslog messages of the IPSec subsys-
tem to be recorded internally.
Possible values:
•
(highest priority)
•
•
•
•
•
•
•
(default value, lowest priority)
Syslog messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at syslog level debug.
Description
The IPSec Pathfinder Mode insures that data traffic (IKE, ESP,
AH) between peers is integrated into a pseudo HTTPS session.
The function is enabled with
The function is disabled by default.
.
18 VPN
303
Advertisement
Table of Contents
