Snmp Shell - Funkwerk R1202 Reference Manual

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Menu
E-mail Alert
SNMP
Activity Monitor
Monitoring
Menu
Internal Log
IPSec
ISDN/Modem
Interfaces
Bridges
HotSpot Gateway
QoS
OSPF
PIM

8.3.2 SNMP shell

SNMP (Simple Network Management Protocol) is a protocol that defines how you can ac-
cess the configuration settings.
All configuration settings are stored in the MIB (Management Information Base) in the form
of MIB tables and MIB variables. You can access these directly from the SNMP shell via
SNMP commands. This type of configuration requires a detailed knowledge of our devices.
Function
Depending on the configuration, in this menu e-mails are sent to
the administrator as soon as relevant syslog messages occur.
In this menu, you configure whether the device is to listen for
external SNMP accesses and send SNMP traps.
In this menu, you configure the monitoring of your device with
the Windows Tool Activity Monitor.
Function
In this menu, the system messages are displayed.
In this menu, the IPSec connections and connection statistics
that are currently active are displayed.
In this menu, the ISDN connections are displayed.
In this menu, connection statistics and status of all interfaces
are displayed.
In this menu you can view the current values of the configured
bridges.
This menu shows a list of all bintec Hotspot users.
In this menu, statistics are displayed for all interfaces for which
QoS has been configured.
In this menu, status and statistics are displayed for all interfaces
for which OSPF has been configured.
In this menu, statistics are displayed for all interfaces for which
PIM has been configured.
8 Access and configuration
73