Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
System Name
Location
Contact
Maximum Number of
Syslog Entries
Maximum Message
Level of Syslog Entries
Value
Enter the system name of your device. This is also used as the
PPP host name.
A character string of up to 255 characters is possible.
The device type is entered as the default value.
Enter the location of your device.
Enter the relevant contact person. Here you can enter the e-
mail address of the system administrator, for example.
A character string of up to 255 characters is possible.
The default value is
Enter the maximum number of syslog messages that are stored
internally in the device.
Possible values are
to
The default value is
. You can display the stored messages in
Monitoring->Internal Log.
Select the priority of system messages above which a log
should be created.
System messages are only recorded internally if they have a
higher or identical priority to that indicated, i.e. all messages
generated are recorded at syslog level
Possible values:
•
: Only messages with emergency priority are re-
corded.
•
: Messages with emergency and alert priority are recor-
ded.
•
: Messages with emergency, alert and critical prior-
ity are recorded.
•
: Messages with emergency, alert, critical and error pri-
ority are recorded.
•
: Messages with emergency, alert, critical, error and
warning priority are recorded.
10 System Management
.
.
.
89
Advertisement
Table of Contents
