Page 2
Liability While every effort has been made to ensure the accuracy of all information in this manual, Funkwerk Enterprise Communications GmbH cannot assume liability to any party for any loss or damage caused by errors or omissions or by statements of any kind in this document and is only liable within the scope of its terms of sale and delivery.
CREDITS Menu CREDITS Menu The fields of the CREDITS menu are described below. R4100 Setup Tool Funkwerk Enterprise Communications GmbH [CREDITS]: CREDITS Configuration MyGateway ISDN Credits xDSL Credits EXIT Charges The Credits Based Accounting System of the gateway enables you to control the costs billed for data connections.
Page 6
CREDITS Menu bintec User’s Guide CREDITS...
ISDN Credits Submenu ISDN Credits Submenu The ISDN C submenu is described below. REDITS R4100 Setup Tool Funkwerk Enterprise Communications GmbH [CREDITS][ISDN CREDITS]: Configure Credits MyGateway Select Subsystem Subsystem Surveillance capi isdnlogin EXIT ➜ The CREDITS ISDN C menu lists the subsystems with the REDITS status.
ISDN Credits Submenu R4100 Setup Tool Funkwerk Enterprise Communications GmbH [CREDITS][ISDN CREDITS][EDIT]: Configure ppp Credits MyGateway Surveillance (Changing a value will reset all measured values!) Measure Time (sec) 86400 Maximum Number of Incoming Connections Maximum Number of Outgoing Connections Maximum Charge...
Page 9
ISDN Credits Submenu Field Description Maximum Number of Maximum number of all incoming connections Incoming Connections allowed during M EASURE If you activate this setting with on, you can enter the desired value in the line below. The default value is off. Maximum Number of Out- Maximum number of all outgoing connections going Connections...
ISDN Credits Submenu Field Description Maximum Number of Cur- Maximum number of incoming connections rent Incoming Connec- allowed at any one time. tions If you activate this setting with on, you can enter the desired value in the line below. The default value is off.
The CREDITS DSL C menu provides access to the PPP REDITS REDITS submenu. R4100 Setup Tool Funkwerk Enterprise Communications GmbH [CREDITS][XDSL CREDITS][EDIT]: Configure PPPoE Credits MyGateway Surveillance (Changing a value will reset all measured values!) Measure Time (sec) 86400 Maximum Number of Outgoing Connections...
Page 12
xDSL Credits Submenu Field Description Maximum Number of Out- Maximum number of all outgoing connections going Connections allowed during M EASURE If you activate this setting with on, you can enter the desired value in the line below. The default value is on with 1000. Maximum Time for Outgo- Maximum time in seconds allowed for all outgo- ing Connections (sec)
Index: CREDITS Charges Credits Based Accounting System ISDN Credits isdnlogin Maximum Charge Maximum Number of Current Incoming Connections Maximum Number of Current Outgoing Connections Maximum Number of Incoming Connections 7, 10 Maximum Number of Outgoing Connections Maximum Time for Incoming Connections (sec) 7, 10 Maximum Time for Outgoing Connections (sec) 6, 9...
Need help?
Do you have a question about the bintec R4100 and is the answer not in the manual?
Questions and answers