Funkwerk Bintec R41000 Reference page 76

6 Technical data
62
Fig. 28: SHDSL interface (RJ45 connector)
In 2 wire mode, the wire pairs a1 and b1 are used. In 4 wire mode, the additional wire pairs
a2 and b2 are used.
The pin assignment for the SHDSL interface (RJ45 connector) is as follows:
RJ45 socket for SHDSL connection bintec R3400
Pin
1
2
3
4
5
6
7
8
The SHDSL interface on bintec R3800 is connected via an RJ45 connector. The cable
supplied connects the RJ45 connector needed for the device to an RJ45 connector needed
for the SHDSL connection.
The following pins are used for the SHDSL connection:
Fig. 29: SHDSL interface (RJ45 connector)
The use of wire pairs can be configured in the Funkwerk Configuration Interface .
The pin assignment for the SHDSL interface (RJ45 connector) is as follows:
RJ45 socket for SHDSL connection bintec R3800
Funkwerk Enterprise Communications GmbH
bintec R3400
Function
Not used
Not used
Not used
Line a1
Line b1
Not used
Line a2
Line b2
bintec R3800
R1xxx/R3xxx/R4xxx