Table of Contents
Advertisement
4 Basic configuration
14
The following table shows examples of possible values for the necessary access data. You
can enter your personal data in the "Your values" column, so that you can refer to these
values later when needed.
If you configure a new network, you can use the given example values for IP addresses
and netmasks. In cases of doubt, ask your system administrator.
Basic configuration
For a basic configuration of your gateway, you need information that relates to your net-
work environment:
Basic information
Access data
IP address of your gateway
Netmask of your gateway
Internet access over ADSL
If you want to set up Internet access, you need an Internet Service Provider (ISP). You also
receive your personal access data from your ISP. The terms used for the required access
data may vary from provider to provider, However, the type of information you need for dial-
in in is basically the same.
The following table lists the access data that your device also needs for a DSL connection
to the Internet.
Data for internet access over ADSL
Access data
Provider name
Protocol
Encapsulation
VPI (Virtual Path Identifier)
VCI (Virtual Circuit Identifier)
Your user name
Password
Some Internet Service Providers, such as T-Online, require additional information:
Additional information for T-Online
Funkwerk Enterprise Communications GmbH
Example value
Example value
Your values
Your values
R1xxx/R3xxx/R4xxx
Advertisement
Table of Contents
