Funkwerk Bintec R41000 Reference page 304

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

17 WAN
278
Field
Prioritize TCP ACK
Packets
Compression
Fields in the Advanced SettingsIP Options menu
Field
OSPF Mode
Proxy ARP Mode
Funkwerk Enterprise Communications GmbH
Description
Select whether the TCP download is to be optimised in the
event of intensive TCP upload.
The function is enabled with
The function is disabled by default.
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. If encryption is set, the
remote terminal must also support it, otherwise a connection
cannot be set up.
Possible values:
(default value): Encryption is not used.
: Microsoft Point-to-Point Compression
Description
Specify whether OSPF protocol packets are sent over the inter-
face.
Possible values:
(default value): OSPF is not activated for this inter-
face, i.e. no OSPF protocol packets sent over this interface.
Networks reachable over this interface are, however, included
when calculating the routing information and propagated over
active interfaces.
: OSPF is not activated for this interface, i.e. OSPF
protocol packets sent over this interface.
: OSPF is disabled for this interface.
Select whether and how ARP requests are to be responded to
for the specified connection partner.
Possible values:
(default value): Deactivates Proxy ARP for this
connection partner.
.
R1xxx/R3xxx/R4xxx

Advertisement

Table of Contents
loading

Table of Contents