Table of Contents
Advertisement
18 VPN
310
Field
Connection Idle
Timeout
Fields in the UsersIP Mode and Routes menu
Field
IP Address Mode
Default Route
Create NAT Policy
Funkwerk Enterprise Communications GmbH
Description
The function is disabled by default.
Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
to
short hold. The default value is
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
(default value): You enter a static IP address.
•
Your device dynamically assigns an IP address to the remote
terminal.
•
: Only for Connection Type =
device is dynamically assigned an IP address.
Only for IP Address Mode =
and
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
The function is disabled by default.
Only for IP Address Mode =
and
Specify whether Network Address Translation (NAT) is to be ac-
tivated for this connection.
(seconds).
deactivates the
.
: Only for Connection Type =
.
R1xxx/R3xxx/R4xxx
.
. Your
Advertisement
Table of Contents
