Table of Contents
Advertisement
Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
Field
Antenna Diversity
Transmit Power
Description
In Access Client mode, you may only select the proper channel
in Client Mode =
Possible values:
• For Operation Band =
Possible values are
to
• For Operation Band =
Possible values are
,
value)
• For Operation Band =
Only the
option is possible here.
Select how many and which antennas are used to send and re-
ceive.
If the function is deactivated, only the main antenna sends and
receives.
If the function is activated, two antennas receive and the better
signal is evaluated.
The function is enabled with
The function is activated by default.
Select the maximum value for the radiated antenna power. The
actually radiated antenna power may be lower than the maxim-
um value set, depending on the data rate transmitted. The
maximum value for Transmit Power is country-dependent.
Possible values:
•
(default value): The maximum antenna power is used.
•
: Enter the required maximum value in dBm
in the input field.
•
•
•
.
and
(default value).
,
,
and
(standard
.
13 Wireless LAN
and
159
Advertisement
Table of Contents
