Funkwerk Bintec R41000 Reference page 469

Bintec r1xxx/r3xxx/r4xxx gateways reference manual
Table of Contents

Advertisement

Funkwerk Enterprise Communications GmbH
R1xxx/R3xxx/R4xxx
optionally also of wired parts. Several WLAN clients (terminals) can
log in to an access point (AP) and communicate via the AP data. If
the optional wired Ethernet is connected, the signals between the
two physical media, the wireless interface and wired interface, are
bridged (bridging).
Access protection
Filters can be used to prevent external persons from accessing the
data on the computers in your LAN. These filters are a basic func-
tion of a firewall.
Accounting
Recording of connection data, e.g. date, time, connection duration,
charging information and number of data packets transferred.
Active probing
Active probing takes advantage of the fact that as standard, access
points are to respond to client requests. Clients therefore send
"probe requests" on all channels and wait for responses from an ac-
cess point in the vicinity. The response packet then contains the
SSID of the wireless LAN and information on whether WEP encryp-
tion is used.
Ad hoc network
An ad hoc network refers to a number of computers that form an in-
dependent 802.11 WLAN each with a wireless adapter. Ad hoc net-
works work independently without an access point on a peer-to-peer
basis. Ad hoc mode is also known as IBSS mode (Independent Ba-
sic Service Set) and makes sense for the smallest networks, e.g. if
two notebooks are to be linked to each other without an access
point.
ADSL
Asymmetric digital subscriber line
AH
Authentication header
Alphanumeric dis-
Display unit e.g. for T-Concept PX722 system telephone, able to
play
display letters and other characters as well as digits.
Analogue connec-
For the connection of analogue terminals such as telephone, fax
tions
and answering machine.
Analogue terminals
Terminals that transmit voice and other information analogously,
e.g. telephone, fax machine, answering machine and modem.
Analogue voice
To transmit voice via the telephone, acoustic oscillations are conver-
transmission
ted to continuous electrical signals, which are transmitted via a net-
work of lines (digital voice transmission).
Answering machine
You configure an analogue answering machine under "Terminal
Type".
Glossary
443

Advertisement

Table of Contents
loading

Table of Contents